P2801

P2801: Transmission Range Sensor B Circuit Range/Performance

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car isn't sure which gear you've selected, because the backup gear-position sensor is sending a bad signal. The gear indicator may disagree with the shifter, and shifting can act strangely.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. 1. Watch the gear-position PID on a scan tool while slowly moving the shifter through every detent - look for a position that reads wrong or flickers.
  2. 2. Check the sensor mounting: looseness or a slipped adjustment is the most common cause of a range/performance code. Tests: range sensor B misadjusted - the classic cause of a range/performance code
  3. 3. Inspect the connector pins for corrosion that could skew the signal. Tests: corroded connector pins adding resistance to the signal
  4. 4. Check the shift linkage and cable for wear or play that moves the sensor out of its expected window. Tests: shift linkage wear or play throwing the sensor reading off
  5. 5. Re-adjust or replace the sensor if the signal won't track the shifter accurately.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $180
Labor$100 – $300

Replacing an external transmission range sensor, including adjustment. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2801 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — An external range sensor is a straightforward driveway replacement; an internal valve-body sensor means dropping the pan and is shop work.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →