P2727: Pressure Control Solenoid E Control Circuit Open
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonHard/banging shifts can cause permanent internal damage. Fix promptly, avoid hard acceleration and towing.
The E pressure control solenoid circuit is open - expect limp mode, hard shifts, or slipping.
Key facts
P2727 means pressure Control Solenoid E Control Circuit Open. The E pressure control solenoid circuit is open - expect limp mode, hard shifts, or slipping. WrenchFair's published fair-price range for this repair is $60–$900 parts and $150–$1500 labor at independent shops.
WrenchFair rates P2727 a 4-of-5 DIY difficulty (“Fluid/filter service and wiring checks are DIY; pressure solenoid or valve body work needs pan removal and transmission-specific knowledge.”) with a “Diagnose soon” driveability rating: Hard/banging shifts can cause permanent internal damage. Fix promptly, avoid hard acceleration and towing. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
increased fuel consumption
check engine light activated
transmission overheats
transmission slips when shifting
transmission shifts hard (banging into gear)
possible misfire-like symptoms
transmission put into limp mode by the PCM
Likely causes
Defective pressure control solenoid
Contaminated transmission fluid
Restricted transmission filter
Defective transmission pump
Defective transmission valve body
Blocked hydraulic passages
Corroded or damaged connector
Faulty or damaged wiring
Faulty PCM
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 7 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Research Technical Service Bulletins for the specific vehicle by year, model, and transmission. Tests: Contaminated transmission fluid
Check vehicle records to verify the last time the filter and fluid were changed.
Check the fluid level and examine the fluid condition for contamination.
Perform a detailed visual inspection of the wiring for obvious defects; check connectors and connections for security, corrosion, and damaged pins - including all wiring to the pressure control solenoids, transmission pump, and PCM. Tests: Defective pressure control solenoid
Common repairs: changing the fluid and filter, replacing the defective pressure control solenoid, repairing or replacing the transmission pump or valve body, flushing to clean passages, cleaning connector corrosion, repairing wiring.
Beware of misdiagnosis: engine misfire, transmission pump malfunction, internal transmission problem, or driveline problem can mimic this code.
Advanced diagnosis needs a digital multimeter and the vehicle-specific troubleshooting data (voltage and fluid pressure requirements vary by model). Perform continuity checks with power removed - normal wiring/connections should read 0 ohms.
Typical price range
Parts$60 – $900
Labor$150 – $1500
Fluid/filter service or pressure control solenoid replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2727 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Fluid/filter service and wiring checks are DIY; pressure solenoid or valve body work needs pan removal and transmission-specific knowledge.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →