P2707

P2707: Shift Solenoid F Performance / Stuck Off

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The F shift solenoid is not performing or is stuck off - the transmission may slip or go into limp mode.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 8 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Research Technical Service Bulletins for the specific vehicle by year, model, and transmission. Tests: Dirty or clogged transmission filter
  2. Check vehicle records to verify the last time the filter and fluid were changed.
  3. Make sure the fluid level is correct and inspect the fluid condition for contamination. Tests: Insufficient fluid level
  4. Perform a thorough visual inspection of associated wiring for scraping, rubbing, bare wires, or burn spots.
  5. Check all connectors and connections (to the transmission solenoids, transmission pump, and PCM) for security, corrosion, and damaged pins.
  6. Inspect the transmission linkage for security and binding issues.
  7. Common repairs: changing the fluid and filter, repairing or replacing the faulty shift solenoid, repairing or replacing the valve body, flushing to clean passages, cleaning connector corrosion, repairing wiring.
  8. Advanced diagnosis needs a digital multimeter and the vehicle-specific troubleshooting chart (voltage requirements vary by year and model). Perform continuity checks with power removed - normal wiring/connections should read 0 ohms.

Typical price range

Parts$60 – $800
Labor$150 – $1500

Fluid/filter service or shift solenoid replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2707 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Fluid and filter service and wiring inspection are DIY; solenoid or valve body replacement needs pan removal and transmission-specific knowledge.

Parts & tools

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →