Diagnose soonPrioritize this - slipping and erratic shifting can cause further internal transmission damage if driven daily with the fault present.
A clutch pack or band inside the transmission is not applying properly - expect slipping or harsh shifts.
Key facts
P2703 means transmission Friction Element D Apply Time Range/performance. A clutch pack or band inside the transmission is not applying properly - expect slipping or harsh shifts. WrenchFair's published fair-price range for this repair is $60–$1500 parts and $150–$2500 labor at independent shops.
WrenchFair rates P2703 a 5-of-5 DIY difficulty (“Checking ATF level and condition is DIY; internal friction element work requires transmission disassembly by a specialist.”) with a “Diagnose soon” driveability rating: Prioritize this - slipping and erratic shifting can cause further internal transmission damage if driven daily with the fault present. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
On your 2023–2024 Ford Bronco Sport (1.5L EcoBoost I3, 2.0L EcoBoost I4) — 8F35 no/harsh reverse engagement - selectable one-way clutch (TSB 25-2127, P0767):Factory-documented
Not a DIY repair - the transmission comes out and is overhauled on a bench fixture. Your leverage is the diagnosis: scan for P0767/P0766/P2703, note whether reverse is dead or harsh, and hand the dealer TSB 25-2127 so the right part gets ordered the first time.
Do this test first: Research Technical Service Bulletins for known issues with the specific vehicle.
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for p2703 on the 2023–2024 Ford Bronco Sport — but the community-sourced 8F35 no/harsh reverse engagement - selectable one-way clutch (TSB 25-2127, P0767) note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Tips
TSB 25-2127 (June 2025) covers 2023-2024 Bronco Sport with the 8F35 automatic: intermittent or constant no-reverse engagement, illuminated MIL with P0767:00 in the PCM, and sometimes harsh reverse engagement with P0766:00 and/or P2703:00. Root cause is an internal mechanical concern with the selectable one-way clutch (SOWC).
The prescribed fix is transmission-out surgery: replace the SOWC (part JM5Z-7P030-C) plus clutch feed seals and overhaul the main control valve body - 14.2 to 18.0 hours of labor. This is a warranty job, full stop; nobody should be paying out of pocket for a 2023-2024 with this symptom.
Owner context: broncosportforum members report 8F35 slipping and 'shift sys fault' alerts on 2021-2023 Sports, with at least one owner getting a full transmission replacement after the dealer could not isolate it. If your dealer proposes a valve body or full trans before checking this TSB, point them at 25-2127 and the SOWC first.
The TSB applies to both 1.5L and 2.0L 8F35 combinations. If reverse works fine but forward shifts are harsh, this is not your TSB - that is the adaptive-shift relearn behavior Ford documents separately.
Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).
Typical time: “The prescribed fix is transmission-out surgery: replace the SOWC (part JM5Z-7P030-C) plus clutch feed seals and overhaul the main control valve body - 14.2 to 18.0 hours of labor.” — as written in the note. First-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
uneven handling
transmission slipping
erratic shifting
abnormal shift patterns
harsh shift selection
ATF leak
low torque
abnormal power output
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 7 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Research Technical Service Bulletins for known issues with the specific vehicle.
Start with the transmission fluid: check ATF level, color, smell, and debris; if service history is unknown, perform a transmission service (filter + fluid + gasket) before continuing. Ensure the correct ATF is used. Tests: TCM (Transmission Control Module) issue
Check for ATF leaks.
Locate the transmission harness connector(s) - ensure the correct one is seated properly; inspect for ATF saturation, loose connections, or vibration damage. Tests: Water damage to module and/or harness
Inspect wiring for open, short, chafe, or heat damage.
Check the overall vehicle condition: verify all tires are the same size and properly inflated - uneven tire sizes, worn suspension parts, or incorrect wheels can cause issues in this system.
If the fault persists after the fluid service and wiring checks, suspect an internal worn friction element or TCM/ECM issue - advanced diagnosis needs vehicle-specific equipment.
Most likely job on your 2023–2024 Ford Bronco Sport: 8F35 no/harsh reverse engagement - selectable one-way clutch (TSB 25-2127, P0767) — test first, then buy for this job.
The price range below is a national planning range for p2703 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$60 – $1500
Labor$150 – $2500
Transmission service or internal rebuild. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2703 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
5 of 5 — Checking ATF level and condition is DIY; internal friction element work requires transmission disassembly by a specialist.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →