P260C

P260C: Pto Control Circuit High

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The auxiliary equipment circuit (PTO) voltage is too high - your truck drives fine, the plow or winch may not.

Model notes: This code only appears on vehicles equipped with a power take-off system (trucks, work vehicles) - it does not apply to passenger cars without PTO.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Research Technical Service Bulletins for the specific vehicle by year, model, and engine/transmission configuration.
  2. Locate all components associated with the PTO control circuit and perform a thorough visual inspection for physical damage. Tests: Open or short in PTO control circuit
  3. Check associated wiring for scraping, rubbing, bare wires, or burn spots.
  4. Check all connectors and connections (including to the PCM) for security, corrosion, and damaged pins. Tests: Corroded, damaged, or loose connector
  5. Verify whether a fuse or fusible link is incorporated into the circuit and test/replace as needed.
  6. For advanced diagnosis, use a digital multimeter with the specific technical references for the vehicle to check voltage and resistance in the circuit.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$20 – $200
Labor$100 – $300

Wiring repair or PTO relay replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P260C ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Visual inspection and fuse/relay checks are easy; tracing the circuit needs a multimeter and service data.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →