P2517

P2517: A/c Refrigerant Pressure Sensor B Circuit Low

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The air-conditioning pressure sensor B is reading too low - your A/C may not cool properly; refrigerant work is best left to a pro if you lack experience.

Model notes: Applies to Chevy, Ford, Volvo, Dodge, Hyundai, Vauxhall, Honda, Nissan, Renault, Alfa Romeo, and others.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Research Technical Service Bulletins for the specific vehicle by year, model, and transmission.
  2. Verify sensor operation: monitor refrigerant pressures and desired values with a capable scan tool, or compare mechanically with an A/C manifold gauge set and manufacturer desired values (only if experienced with refrigerant). Tests: Defective or damaged A/C refrigerant pressure sensor
  3. Test the A/C refrigerant pressure sensor per manufacturer-specific pin values and desired ranges. Tests: Defective or damaged A/C refrigerant pressure sensor
  4. Check the wiring - sensors mounted on A/C pressure lines can be damaged by moving parts under the hood if the line is not secured; make sure the sensor looks good physically and the line is fastened adequately. Tests: Defective or damaged A/C refrigerant pressure sensor
  5. Check connectors for damage and poor connections.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $150
Labor$80 – $250

A/C refrigerant pressure sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2517 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — TSB research and visual wiring inspection are DIY-friendly; sensor testing per manufacturer specs is intermediate; refrigerant handling is pro-only.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →