P245D

P245D: Exhaust Gas Recirculation Cooler Bypass Control Circuit High

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The EGR cooler bypass valve circuit voltage is too high - usually a wiring fault or corroded connector.

Model notes: Diesel vehicles from Ford, Dodge, Ram, Jeep, Chevrolet, VW, Mercedes.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Research Technical Service Bulletins for the specific vehicle by year, model, and powertrain.
  2. Locate all components associated with the EGR cooler bypass circuit (temperature switch, bypass valve, EGR valve, EGR cooler, ECM) and examine for obvious physical damage. Tests: Defective EGR cooler bypass valve
  3. Visually inspect the associated wiring for scraping, rubbing, bare wires, or burn spots.
  4. Check all connectors and connections for security, corrosion, and damaged pins, including the EGR temperature switch and ECM. Tests: Corroded, damaged, or loose connector
  5. Perform voltage and continuity checks per the vehicle technical data; wiring should read 0 ohms with power removed.
  6. Check for excessive carbon buildup on the bypass valve before replacing it.
  7. Repair or replace open, shorted, or corroded wiring; replace failed components.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$100 – $800
Labor$100 – $400

EGR cooler bypass valve or EGR cooler replacement, or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P245D ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Locating EGR bypass components, visual wiring inspection, and TSB research are DIY-friendly; circuit testing per specs is intermediate.

Watch this repair on YouTube

Parts & tools

EGR toolkit — what the job actually takes

Torque specs: Typically 20–30 Nm into iron, less into aluminum — verify spec.

Pro tip: Clean the passages, not just the valve — a new valve on clogged passages throws the same code.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →