Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeEmissions-only system active at cold start. Safe to drive.
A valve in the cold-start air system is stuck open, which can let hot exhaust flow backward and destroy the air pump. Fix it before the pump dies too.
VW/Audi note (VCDS): Soot in the air injection hoses is the telltale of backflow - clean white hoses mean the check valve did its job.
Model notes: A stuck-open switching valve is a pump killer - exhaust backflow destroys the pump quickly. If the valve failed open, budget for a pump inspection at minimum.
Key facts
P2440 means secondary air injection system switching valve stuck open, bank 1. A valve in the cold-start air system is stuck open, which can let hot exhaust flow backward and destroy the air pump. Fix it before the pump dies too. WrenchFair's published fair-price range for this repair is $100–$300 parts and $150–$350 labor at independent shops.
WrenchFair rates P2440 a 3-of-5 DIY difficulty (“Replace the check valve with the switching valve - backflow damage is the real risk.”) with a “Drive safe” driveability rating: Emissions-only system active at cold start. Safe to drive. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
failed emissions test
eventual air pump failure from exhaust backflow
possible exhaust leak noise
Likely causes
Carbon-fouled switching valve stuck open (most common)
Failed valve solenoid
Failed check valve allowing exhaust backflow
Vacuum supply problem (vacuum-operated designs)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Remove the valve and check for exhaust soot inside the air passages - soot means backflow has occurred Tests: Failed check valve allowing exhaust backflow
Test the valve's ability to close fully
Replace the check valve at the same time - it is the backflow protection Tests: Failed check valve allowing exhaust backflow
Inspect the air pump for exhaust contamination; a soot-filled pump needs replacement too Tests: Failed check valve allowing exhaust backflow
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $300
Labor$150 – $350
Pump or valve replacement is typical. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2440 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Replace the check valve with the switching valve - backflow damage is the real risk.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →