Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeEmissions-only system active at cold start. Safe to drive.
The system that pumps fresh air into the exhaust to warm up your catalytic converter faster isn't working. You'll only notice it as a check engine light - it runs for just a minute after cold starts.
VW/Audi note (VCDS): Command the air pump with the scan tool on a cold engine and feel for airflow at the exhaust manifold injection points.
Model notes: Water ingestion kills air pumps - check that the pump intake is not drawing water from a missing or damaged hose. A failed check valve lets exhaust back into the pump and destroys it.
Key facts
P0410 means secondary air injection system malfunction. The system that pumps fresh air into the exhaust to warm up your catalytic converter faster isn't working. You'll only notice it as a check engine light - it runs for just a minute after cold starts. WrenchFair's published fair-price range for this repair is $100–$300 parts and $150–$350 labor at independent shops.
WrenchFair rates P0410 a 3-of-5 DIY difficulty (“The pump only runs briefly on cold starts - diagnosis needs a cold engine.”) with a “Drive safe” driveability rating: Emissions-only system active at cold start. Safe to drive. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
failed emissions test
no drivability symptoms
pump may be noisy or silent on cold start
hesitation on acceleration
Likely causes
Failed air pump (most common)
Failed pump relay
Stuck air switching valve
Blocked or leaking air hoses
Blown fuse
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
On a cold start, listen for the air pump - it should run for 1-2 minutes; silence points at pump, relay, or fuse Tests: Failed pump relay
Check the fuse and swap the relay
Test the switching valves for proper operation Tests: Stuck air switching valve
Inspect hoses for blockages - carbon and moisture collect in low points
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $300
Labor$150 – $350
Pump or valve replacement is typical. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0410 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The pump only runs briefly on cold starts - diagnosis needs a cold engine.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →