P2143

P2143: Exhaust gas recirculation vent control circuit open

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

There is a break in the wiring to the EGR vent solenoid - the computer cannot control the valve that vents excess exhaust gas.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Research technical service bulletins for your vehicle.
  2. Let the engine cool down - EGR components are mounted near the hot exhaust.
  3. Inspect all rubber vacuum lines to the EGR vent solenoid for burning, cracking, or kinks - replace deteriorated lines. Tests: EGR vent solenoid defective
  4. Verify the integrity of the wiring harnesses around the exhaust - tie up loose wires.
  5. Inspect the vent solenoid for cracks and water intrusion; ensure connectors are secure with intact tabs.
  6. Remove the EGR valve if accessible and clean soot with carburetor cleaner.
  7. Test the vent solenoid and its circuit with a DVOM against service specifications.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$50 – $400
Labor$100 – $300

EGR vent solenoid replacement, EGR cleaning, wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P2143 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Letting the engine cool, inspecting vacuum lines and wiring, and cleaning the EGR valve are DIY-friendly.

Watch this repair on YouTube

Parts & tools

EGR toolkit — what the job actually takes

Torque specs: Typically 20–30 Nm into iron, less into aluminum — verify spec.

Pro tip: Clean the passages, not just the valve — a new valve on clogged passages throws the same code.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →