P20F7

P20F7: Reductant injection valve stuck open bank 2 unit 1

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

On your diesel, the diesel exhaust fluid injector for bank 2 is stuck open and dosing fluid non-stop.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 7 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check for technical service bulletins for your vehicle.
  2. Check the DEF level in the reservoir and top up with fresh fluid if low. Tests: Insufficient DEF in the reservoir
  3. Visually inspect the reductant injection system harnesses and connectors - repair burnt or damaged wiring first. Tests: Bad reductant injection valve stuck open (most common)
  4. Retrieve all codes and freeze frame data, clear the codes, and test drive.
  5. Test the power supply to the SCR control system with the DVOM; test fuses with the circuit loaded.
  6. Use the scanner to activate the reductant injector valve and test the output control circuit voltage.
  7. Test the reductant injection valve itself against the manufacturer's specifications.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$150 – $600
Labor$150 – $400

Reductant injection valve replacement or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P20F7 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Checking the DEF level and inspecting the injector wiring is DIY-friendly; activating the injector and testing the control circuit needs a capable scanner.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →