P20EC

P20EC: SCR NOx catalyst over temperature bank 1

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

On your diesel, the emissions catalyst on bank 1 is running hotter than it should - the exhaust treatment system may shut down and the catalyst can be damaged.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Address any other stored SCR or exhaust temperature codes first. Tests: Defective exhaust temperature sensor (most common)
  2. Repair any pre-catalyst exhaust leaks before diagnosing. Tests: Pre-catalyst exhaust leaks
  3. Make sure the DEF reservoir is filled with the correct fluid and not contaminated.
  4. Visually inspect the SCR injection system, exhaust temperature sensors, NOx sensors, and oxygen sensor harnesses and connectors. Tests: Defective exhaust temperature sensor (most common)
  5. Compare pre-cat and post-cat temperature sensor data on the scanner; test sensors that disagree against manufacturer specifications.
  6. If all sensors and circuitry test good, suspect a faulty catalyst element or failed SCR system.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$100 – $1500
Labor$150 – $500

Exhaust temperature sensor replacement or SCR system repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P20EC ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Checking the DEF level and looking for exhaust leaks is DIY-friendly; confirming catalyst over-temperature needs a scanner and service info.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →