P0987: Transmission fluid pressure sensor/switch E circuit
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe computer cannot verify pressure without this sensor - rough shifting is the start; diagnose it before the guessing game damages clutches.
The sensor that watches hydraulic pressure for one part of your transmission has an electrical fault. Expect rough shifting and limp mode while the computer guesses at pressure.
Key facts
P0987 means transmission fluid pressure sensor/switch E circuit. The sensor that watches hydraulic pressure for one part of your transmission has an electrical fault. Expect rough shifting and limp mode while the computer guesses at pressure. WrenchFair's published fair-price range for this repair is $80–$600 parts and $300–$800 labor at independent shops.
WrenchFair rates P0987 a 4-of-5 DIY difficulty (“Circuit testing is DIY-able; sensor replacement usually means dropping the pan.”) with a “Diagnose soon” driveability rating: The computer cannot verify pressure without this sensor - rough shifting is the start; diagnose it before the guessing game damages clutches. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
rough or erratic shifting
transmission in limp mode
delayed gear engagement
Likely causes
Failed fluid pressure sensor E (most common)
Open or shorted wiring in the sensor circuit
Corroded transmission connector (fluid intrusion is common)
Damaged internal transmission harness
Failed PCM/TCM (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all codes; accompanying pressure, solenoid, or gear-ratio codes help narrow the circuit. Tests: Failed fluid pressure sensor E (most common)
Look up TSBs for the year, make, and model matching this code.
Inspect the transmission's external wiring harness and connector for damage and fluid intrusion. Tests: Corroded transmission connector (fluid intrusion is common)
Test sensor E's circuit for opens, shorts, and proper voltage and ground per the factory chart. Tests: Open or shorted wiring in the sensor circuit
Compare the sensor reading against actual line pressure with a manual gauge at the test port.
If the circuit tests good but the sensor lies, the sensor (or its internal harness) needs replacement - pan removal is usually required.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $600
Labor$300 – $800
Pressure sensor E replacement (pan removal; often sold with the valve body or internal harness). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0987 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Circuit testing is DIY-able; sensor replacement usually means dropping the pan.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →