P0963

P0963: Pressure control solenoid A control circuit high

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The wire controlling your transmission's pressure solenoid is stuck high - fluid pressure is maxed out. Expect harsh, slamming shifts.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check fluid level and condition first.
  2. Scan all codes and note the shift behavior - maxed pressure means harsh engagement. Tests: Shorted pressure control solenoid A internally
  3. Inspect the harness for chafing where the control wire could touch a 12V feed. Tests: Solenoid A control wire shorted to battery voltage (most common)
  4. Test the circuit for a short to power with the meter.
  5. Disconnect the solenoid and retest to isolate the short.
  6. Repair wiring or replace the solenoid; pan removal is usually required for solenoid access.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$60 – $400
Labor$150 – $600

Pressure control solenoid A circuit short repair (solenoid replacement if failed). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0963 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Harsh slamming shifts are the telltale sign of this fault.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →