P0960: Pressure control solenoid A control circuit/open
DIY difficulty 4/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonPressure-control faults cause slipping that burns friction material fast - check the fluid and diagnose it soon.
A solenoid that controls your transmission's fluid pressure has an electrical fault. Expect slipping, harsh shifts, and limp mode until it is fixed.
Key facts
P0960 means pressure control solenoid A control circuit/open. A solenoid that controls your transmission's fluid pressure has an electrical fault. Expect slipping, harsh shifts, and limp mode until it is fixed. WrenchFair's published fair-price range for this repair is $60–$400 parts and $150–$600 labor at independent shops.
WrenchFair rates P0960 a 4-of-5 DIY difficulty (“Electrical testing is DIY-able; solenoid replacement usually means dropping the pan.”) with a “Diagnose soon” driveability rating: Pressure-control faults cause slipping that burns friction material fast - check the fluid and diagnose it soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
transmission slipping
harsh or delayed shifts
transmission overheating
limp mode
Likely causes
Failed pressure control solenoid A (most common)
Open or shorted wiring in the solenoid control circuit
Corroded transmission connector (fluid intrusion is common)
Low or contaminated fluid damaging the solenoid
Failed PCM/TCM driver (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check fluid level and condition first - low or burnt fluid is a common accomplice.
Scan all codes; accompanying pressure or gear-ratio codes support a solenoid or pressure fault. Tests: Failed pressure control solenoid A (most common)
Look up TSBs for the year, make, and model matching this code.
Inspect the transmission's external wiring harness and connector for damage and fluid intrusion. Tests: Corroded transmission connector (fluid intrusion is common)
Test solenoid A's circuit for opens, shorts, and proper voltage per the factory chart.
Solenoid testing often requires pan removal - consider a fluid and filter service while you are in there.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $400
Labor$150 – $600
Pressure control solenoid A replacement (fluid and filter service included). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0960 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Electrical testing is DIY-able; solenoid replacement usually means dropping the pan.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →