P0960

P0960: Pressure control solenoid A control circuit/open

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

A solenoid that controls your transmission's fluid pressure has an electrical fault. Expect slipping, harsh shifts, and limp mode until it is fixed.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check fluid level and condition first - low or burnt fluid is a common accomplice.
  2. Scan all codes; accompanying pressure or gear-ratio codes support a solenoid or pressure fault. Tests: Failed pressure control solenoid A (most common)
  3. Look up TSBs for the year, make, and model matching this code.
  4. Inspect the transmission's external wiring harness and connector for damage and fluid intrusion. Tests: Corroded transmission connector (fluid intrusion is common)
  5. Test solenoid A's circuit for opens, shorts, and proper voltage per the factory chart.
  6. Solenoid testing often requires pan removal - consider a fluid and filter service while you are in there.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$60 – $400
Labor$150 – $600

Pressure control solenoid A replacement (fluid and filter service included). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0960 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Electrical testing is DIY-able; solenoid replacement usually means dropping the pan.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →