P0889: TCM power relay sense circuit range/performance
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA sticking relay can drop TCM power without warning - replace the relay before it strands you.
The feedback from your transmission relay does not add up - usually a relay with sticking contacts. Expect intermittent failsafe shifting.
Key facts
P0889 means tCM power relay sense circuit range/performance. The feedback from your transmission relay does not add up - usually a relay with sticking contacts. Expect intermittent failsafe shifting. WrenchFair's published fair-price range for this repair is $20–$300 parts and $120–$400 labor at independent shops.
WrenchFair rates P0889 a 2-of-5 DIY difficulty (“Live-data comparison of commanded versus sensed relay state pinpoints the fault.”) with a “Diagnose soon” driveability rating: A sticking relay can drop TCM power without warning - replace the relay before it strands you. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
intermittent failsafe shifting
relay clicking or buzzing
multiple warning lights that come and go
Likely causes
TCM relay with sticking or burned contacts (most common)
Corroded sense-circuit wiring adding resistance
Intermittent connection at the relay socket
Failing relay coil drawing abnormal current
Failed PCM sense input (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all modules and compare commanded relay state against the sense reading on live data.
Swap-test the TCM relay - sticking contacts are the most common cause. Tests: TCM relay with sticking or burned contacts (most common)
Test the sense circuit wiring for intermittent contact and corrosion. Tests: Corroded sense-circuit wiring adding resistance
Inspect the relay socket for heat damage and spread terminals. Tests: Intermittent connection at the relay socket
Verify with a meter that actual relay output matches the sense signal.
Suspect the computer only after relay and wiring are proven good.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $300
Labor$120 – $400
TCM relay or sense-circuit wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0889 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Live-data comparison of commanded versus sensed relay state pinpoints the fault.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →