Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe computer cannot verify TCM power, so it defaults to failsafe - diagnose it before driving far.
Your car's computer cannot confirm the transmission relay is doing its job - the feedback wire has a fault. Expect failsafe shifting until it is sorted.
Key facts
P0888 means tCM power relay sense circuit. Your car's computer cannot confirm the transmission relay is doing its job - the feedback wire has a fault. Expect failsafe shifting until it is sorted. WrenchFair's published fair-price range for this repair is $20–$300 parts and $120–$400 labor at independent shops.
WrenchFair rates P0888 a 2-of-5 DIY difficulty (“Two halves to check - the relay power path and the sense feedback wire.”) with a “Diagnose soon” driveability rating: The computer cannot verify TCM power, so it defaults to failsafe - diagnose it before driving far. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
transmission stuck in failsafe/limp mode
tcm communication intermittent
multiple warning lights on
Likely causes
Failed TCM power relay (most common)
Open or shorted wiring in the relay sense circuit
Corroded relay socket or fuse terminals
Poor connection at the TCM power feed
Failed PCM sense input (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all modules and note whether the TCM is actually powered and communicating.
Swap-test the TCM relay with an identical known-good relay.
Test the sense circuit wiring between the relay output and the computer for opens and shorts. Tests: Open or shorted wiring in the relay sense circuit
Inspect the relay socket, fuse terminals, and connectors for corrosion. Tests: Corroded relay socket or fuse terminals
Verify actual TCM power with a meter - if the TCM has power but the sense reads bad, the fault is in the sense wiring.
Trace per the factory wiring diagram before suspecting the computer.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $300
Labor$120 – $400
TCM power relay replacement or sense-circuit wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0888 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Two halves to check - the relay power path and the sense feedback wire.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →