Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonUnreliable TCM power means unreliable shifting - trace the short before driving far.
The wire that switches your transmission computer's relay is shorted low. Expect failsafe shifting and a transmission computer that may not wake up.
Key facts
P0886 means tCM power relay control circuit low. The wire that switches your transmission computer's relay is shorted low. Expect failsafe shifting and a transmission computer that may not wake up. WrenchFair's published fair-price range for this repair is $20–$300 parts and $120–$400 labor at independent shops.
WrenchFair rates P0886 a 2-of-5 DIY difficulty (“Relay swap first, then trace the short with a multimeter and wiring diagram.”) with a “Diagnose soon” driveability rating: Unreliable TCM power means unreliable shifting - trace the short before driving far. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
transmission stuck in failsafe/limp mode
intermittent tcm communication
multiple warning lights on
Likely causes
Relay control wire shorted to ground (most common)
Failed TCM power relay
Corroded socket bridging the control line to ground
Failed PCM relay driver (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all modules and note TCM communication status.
Swap-test the TCM relay with an identical known-good relay.
With power removed, test the relay control wire for continuity to ground; repair the shorted section. Tests: Relay control wire shorted to ground (most common)
Inspect the relay socket and connectors for corrosion or bridged pins.
Test the control circuit switching per the factory chart.
Suspect the computer's relay driver only after wiring and relay are proven good.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $300
Labor$120 – $400
TCM power relay replacement or control-circuit short repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0886 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Relay swap first, then trace the short with a multimeter and wiring diagram.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →