Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA dead TCM relay means failsafe-only driving - check the relay before anything else.
The relay that powers your transmission computer is not being switched on properly. Expect a silent transmission computer and harsh failsafe shifting.
Key facts
P0885 means tCM power relay control circuit/open. The relay that powers your transmission computer is not being switched on properly. Expect a silent transmission computer and harsh failsafe shifting. WrenchFair's published fair-price range for this repair is $20–$300 parts and $120–$400 labor at independent shops.
WrenchFair rates P0885 a 2-of-5 DIY difficulty (“Relay swap-testing is a two-minute check that fixes many of these.”) with a “Diagnose soon” driveability rating: A dead TCM relay means failsafe-only driving - check the relay before anything else. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
transmission stuck in failsafe/limp mode
tcm will not communicate with the scan tool
multiple warning lights on
Likely causes
Failed TCM power relay (most common)
Open or damaged wiring in the relay control circuit
Corroded relay socket or fuse terminals
Blown fuse in the relay power feed
Failed PCM/relay driver (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all modules; a TCM that will not communicate supports this diagnosis.
Look up TSBs for the year, make, and model matching this code.
Locate the TCM relay; swap-test it with an identical known-good relay and inspect the socket. Tests: Corroded relay socket or fuse terminals
Test the relay control circuit from the computer to the relay for opens, shorts, and proper switching. Tests: Open or damaged wiring in the relay control circuit
Test the relay power feed fuses with the circuit loaded.
Trace the control circuit per the factory wiring diagram before suspecting the computer.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $300
Labor$120 – $400
TCM power relay replacement or relay control-circuit repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0885 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Relay swap-testing is a two-minute check that fixes many of these.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →