Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonAn intermittent TCM power loss can drop you into failsafe mid-drive - find the loose connection before it picks the moment.
Your transmission computer's power cuts out randomly - expect sudden harsh shifting and flashing warning lights, then everything fine again. Usually a loose relay.
Key facts
P0884 means tCM power input signal intermittent. Your transmission computer's power cuts out randomly - expect sudden harsh shifting and flashing warning lights, then everything fine again. Usually a loose relay. WrenchFair's published fair-price range for this repair is $20–$300 parts and $120–$400 labor at independent shops.
WrenchFair rates P0884 a 2-of-5 DIY difficulty (“Wiggle-testing while watching the meter finds these - patience, not parts.”) with a “Diagnose soon” driveability rating: An intermittent TCM power loss can drop you into failsafe mid-drive - find the loose connection before it picks the moment. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
sudden harsh shifting that clears itself
warning lights flashing on and off
transmission briefly stuck in failsafe
Likely causes
Loose or corroded TCM relay socket (most common)
Intermittent TCM relay with failing contacts
Corroded fuse-box terminals
Loose TCM ground
Chafed power-feed wiring (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all modules and record every code; note any that set and clear on their own.
Look up TSBs for the year, make, and model matching this code.
Wiggle-test the TCM relay, fuses, and connector while watching TCM power on the meter.
Pull the relay and inspect the socket for spread terminals, corrosion, and heat damage. Tests: Loose or corroded TCM relay socket (most common)
Check TCM ground points for looseness and corrosion.
Replace the relay first - it is cheap - then repair terminals as needed.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $300
Labor$120 – $400
TCM relay replacement or power-circuit connector repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0884 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Wiggle-testing while watching the meter finds these - patience, not parts.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →