Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFlaky TCM power can drop the transmission into failsafe without warning - fix the feed before it strands you.
Your transmission computer's power supply is flaky - good enough to run, bad enough to complain. Expect intermittent harsh shifting and warning lights that come and go.
Key facts
P0881 means tCM power input signal range/performance. Your transmission computer's power supply is flaky - good enough to run, bad enough to complain. Expect intermittent harsh shifting and warning lights that come and go. WrenchFair's published fair-price range for this repair is $20–$300 parts and $120–$400 labor at independent shops.
WrenchFair rates P0881 a 3-of-5 DIY difficulty (“Loaded circuit testing catches what static voltage checks miss.”) with a “Diagnose soon” driveability rating: Flaky TCM power can drop the transmission into failsafe without warning - fix the feed before it strands you. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
intermittent harsh shifting
warning lights that come and go
electrical glitches in transmission behavior
Likely causes
TCM relay with burned or pitted contacts (most common)
Corroded fuse-box or relay-socket terminals
Ground connection that fails under load
Chafed power-feed wiring with intermittent contact
Failed TCM (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all modules and record every code and freeze-frame data.
Look up TSBs for the year, make, and model matching this code.
Test TCM power and ground with the circuit loaded - wiggle the relay and fuse while watching the meter. Tests: Corroded fuse-box or relay-socket terminals
Swap-test the TCM relay with an identical known-good relay.
Inspect relay sockets, fuse terminals, and ground points for corrosion and heat damage.
Load-test the power feed wiring per the factory chart before suspecting the TCM.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $300
Labor$120 – $400
TCM power-circuit repair (wiring, grounds, or relay). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0881 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Loaded circuit testing catches what static voltage checks miss.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →