Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonA TCM starved of power gives harsh failsafe shifting - check the relay and fuses before driving far.
Your transmission computer is not getting clean power - usually a bad relay or blown fuse. Expect harsh shifting, and ABS and traction control may quit too.
Key facts
P0880 means tCM power input signal. Your transmission computer is not getting clean power - usually a bad relay or blown fuse. Expect harsh shifting, and ABS and traction control may quit too. WrenchFair's published fair-price range for this repair is $20–$300 parts and $120–$400 labor at independent shops.
WrenchFair rates P0880 a 2-of-5 DIY difficulty (“Relay and fuse checks are easy wins - most of these are fixed before the multimeter comes out.”) with a “Diagnose soon” driveability rating: A TCM starved of power gives harsh failsafe shifting - check the relay and fuses before driving far. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
harsh or erratic shifting
transmission will not shift normally
abs or traction control disabled
multiple related codes stored
Likely causes
Failed TCM power relay or blown fuse (most common)
Corroded relay socket or fuse-box terminals
Open or shorted wiring in the TCM power feed
Poor TCM ground connection
Failed TCM (rare - prove power and ground first)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan all modules and record every code - power faults usually bring company.
Look up TSBs for the year, make, and model matching this code.
Locate the TCM power relay and fuses; test fuses with the circuit loaded and swap-test the relay with an identical known-good one. Tests: Failed TCM power relay or blown fuse (most common)
Test voltage and ground at the TCM connector with the key on.
Inspect the relay socket, fuse box, and TCM connector for corrosion, heat damage, and loose terminals.
Trace the power and ground feeds per the factory wiring diagram before suspecting the TCM itself.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $300
Labor$120 – $400
TCM relay or fuse replacement and power-circuit repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0880 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Relay and fuse checks are easy wins - most of these are fixed before the multimeter comes out.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →