Diagnose soonTransmission hydraulic fault. Drive gently and diagnose soon.
Your transmission's internal hydraulic pressure is too low, so the clutches can't grip - it slips. Keep driving like this and you'll burn up the transmission fast.
Model notes: Low line pressure destroys transmissions quickly through clutch slip - this is a fix-it-now code, not a drive-it-for-weeks code. Check the level today.
Key facts
P0868 means transmission fluid pressure low. Your transmission's internal hydraulic pressure is too low, so the clutches can't grip - it slips. Keep driving like this and you'll burn up the transmission fast. WrenchFair's published fair-price range for this repair is $100–$500 parts and $200–$600 labor at independent shops.
WrenchFair rates P0868 a 4-of-5 DIY difficulty (“Low fluid is the emergency check; internal pressure loss needs professional repair.”) with a “Diagnose soon” driveability rating: Transmission hydraulic fault. Drive gently and diagnose soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
On your 2007–2014 Nissan Maxima (3.5L V6 (VQ35DE)) — CVT fluid type (NS-2 vs NS-3) and P0746/P0868 valve-body faults:Owner-verified
Moderate DIY for a drain-and-fill (correct fluid is critical); valve-body replacement is professional work (replacement units ship with a program disc).
Do this test first: Check fluid level immediately - add the correct fluid and look for leaks
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for P0868 on the 2007–2014 Nissan Maxima — but the community-sourced CVT fluid type (NS-2 vs NS-3) and P0746/P0868 valve-body faults note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Tips
The single most important CVT fact for 2007-2014 Maxima owners: 2012 and older take Nissan NS-2 (green), 2013+ take NS-3. Standard red ATF destroys these transmissions - even some 'universal CVT' fluids are suspect. NS-2/NS-3 only.
Jatco CVTs are maintenance-intolerant: neglected fluid kills them at 100-120k miles, and a used Maxima with unknown CVT history is a gamble - check the fluid condition before buying.
P0746/P0868 with very slow takeoff on a 2013-2014 is the CVT valve-body solenoids - the fix is a replacement valve body, which ships with a program disc for calibration.
If there is no shudder, the belt/chain is probably fine and the valve body is the likely culprit; shudder under load means internal belt slip and the CVT itself is failing.
A drain-and-fill with the correct NS fluid is a reasonable driveway job; a flush machine on a high-mileage neglected CVT is how owners kill them - drain-and-fill only.
Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
slipping in all gears
delayed engagement
overheating transmission
check engine light
burnt fluid smell
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
Low fluid level (most common - check immediately) 4 owner notes link this repair to P0868
Clogged transmission filter starving the pump
Failing front pump
Leaking internal seals
Stuck pressure regulator valve 4 owner notes link this repair to P0868
Owner notes linked to P0868: 4 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check fluid level immediately - add the correct fluid and look for leaks Tests: Low fluid level (most common - check immediately)
If the level was very low, find the leak before anything else
Service the filter if it is overdue - a clogged filter starves the pump Tests: Clogged transmission filter starving the pump
If pressure is still low with full fresh fluid, the pump or internal seals need professional repair - minimize driving Tests: Leaking internal seals
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Most likely job on your 2007–2014 Nissan Maxima: CVT fluid type (NS-2 vs NS-3) and P0746/P0868 valve-body faults — test first, then buy for this job.
The price range below is a national planning range for P0868 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$100 – $500
Labor$200 – $600
Valve body or pressure issue; fluid service first. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0868 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Low fluid is the emergency check; internal pressure loss needs professional repair.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →