P0868

P0868: Transmission fluid pressure low

For your specific vehicle: P0868 on a 2022–2025 Hyundai Santa Cruz · 2007–2014 Nissan Maxima · 2013–2019 Nissan Sentra · 2014–2018 Subaru Forester

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your transmission's internal hydraulic pressure is too low, so the clutches can't grip - it slips. Keep driving like this and you'll burn up the transmission fast.

VW/Audi note (VCDS): Line pressure at idle in gear is the baseline test; if it's low with correct fluid level, the problem is inside.
Model notes: Low line pressure destroys transmissions quickly through clutch slip - this is a fix-it-now code, not a drive-it-for-weeks code. Check the level today.

Key facts

Symptoms

Likely causes

Owner notes linked to P0868: 4 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check fluid level immediately - add the correct fluid and look for leaks Tests: Low fluid level (most common - check immediately)
  2. If the level was very low, find the leak before anything else
  3. Service the filter if it is overdue - a clogged filter starves the pump Tests: Clogged transmission filter starving the pump
  4. If pressure is still low with full fresh fluid, the pump or internal seals need professional repair - minimize driving Tests: Leaking internal seals

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$100 – $500
Labor$200 – $600

Valve body or pressure issue; fluid service first. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0868 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Low fluid is the emergency check; internal pressure loss needs professional repair.

Watch this repair on YouTube

Parts & tools

ABS / wheel-speed toolkit — what the job actually takes

Torque specs: Wheel-speed sensor bolts: typically 8–12 Nm. (Caliper bracket bolts are far tighter — 90–140 Nm — don’t confuse them.)

Pro tip: Inspect the tone ring/reluctor for cracks and debris first — the sensor itself is often innocent.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →