Diagnose soonThe computer is shifting without a good pressure reading on this circuit - limp mode is likely, so diagnose it soon.
A second transmission pressure sensor (the 'B' one) has an electrical fault. Expect changed shift feel and possibly limp mode.
Key facts
P0845 means transmission fluid pressure sensor/switch B circuit. A second transmission pressure sensor (the 'B' one) has an electrical fault. Expect changed shift feel and possibly limp mode. WrenchFair's published fair-price range for this repair is $80–$350 parts and $200–$500 labor at independent shops.
WrenchFair rates P0845 a 4-of-5 DIY difficulty (“Connector inspection is easy; the sensor itself is often inside the pan on the valve body.”) with a “Diagnose soon” driveability rating: The computer is shifting without a good pressure reading on this circuit - limp mode is likely, so diagnose it soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
On your 2007–2007 Nissan Maxima (3.5L V6 (VQ35DE)) — MIL on with P0840/P0845 - CVT pressure sensor (NTB08-042):Factory-documented
Dealer or well-equipped DIY (TCM-level scan needed to confirm the code; sensor is accessible once diagnosed).
Do this test first: Check for TSBs and companion power or pressure codes - diagnose power faults and multi-sensor codes first.
→ Passes: that cause is ruled out — run the next test in the diagnostic path below.
→ Fails: fix what failed — that’s your cause. Clear the code and re-test before buying anything else.
No owner fix reports yet for P0845 on the 2007–2007 Nissan Maxima — but the community-sourced MIL on with P0840/P0845 - CVT pressure sensor (NTB08-042) note above covers an owner-reported fix. Fixed yours? Report it — you'll help the next owner.
Tips
On a 2007 Maxima, a MIL with P0845 stored means the primary CVT oil pressure sensor assembly has failed; P0840 means the secondary pressure sensor assembly - NTB08-042 gives the exact replace-don't-diagnose-further path for each.
The bulletin does NOT apply if both P0840 and P0845 are stored together, or if other DTCs are present - resolve the other codes first.
If the CVT fluid is discolored, smells burnt, the pan has excessive contamination, or you can hear an abnormal transmission noise, the TSB does not apply - that is a deeper transmission problem.
This is a single-model-year bulletin (2007 A34 with the JF011E CVT) - the same codes on other years follow normal diagnostics, not this shortcut.
Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No owner reports yet
Symptoms
changed shift quality - harsh or soft shifts
transmission starts in 2nd or 3rd gear (limp mode)
check-engine light on
Likely causes
What usually pays the bill on this car, most common first — but work the diagnostic path above cheapest-first. Test order and bill order aren’t the same thing.
Corroded or damaged external connector at the transmission (most common)
Failed transmission fluid pressure sensor/switch B 2 owner notes link this repair to P0845
Open, shorted, or chafed wiring in the sensor circuit 2 owner notes link this repair to P0845
Internal transmission problems - leaks, stuck valve, low line pressure 2 owner notes link this repair to P0845
Failed PCM/TCM (rare)
Owner notes linked to P0845: 2 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check for TSBs and companion power or pressure codes - diagnose power faults and multi-sensor codes first. Tests: Failed transmission fluid pressure sensor/switch B
Check fluid level and condition; burnt fluid or debris points to internal problems. Tests: Internal transmission problems - leaks, stuck valve, low line pressure
Locate the TFPS 'B' and inspect its connector and wiring for corrosion, rubbing, and burn spots - external connector corrosion is the most common cause. Tests: Corroded or damaged external connector at the transmission (most common)
Clear the code after cleaning the connector; if it returns, test circuit power, ground, and signal. Tests: Corroded or damaged external connector at the transmission (most common)
Test the sensor against factory specs; replace it if it fails.
If sensor and circuit test good, suspect internal leaks, a stuck valve, or low line pressure.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Most likely job on your 2007–2007 Nissan Maxima: MIL on with P0840/P0845 - CVT pressure sensor (NTB08-042) — test first, then buy for this job.
The price range below is a national planning range for P0845 on this vehicle — not a quote: it spans the common job at the low end to the expensive fork at the high end. 0 owner invoices on this generation — treat these as planning numbers. If a shop quote lands near the top of the range, that’s fork money, not the common job — ask which test failed before authorizing it.
Typical price range
Parts$80 – $350
Labor$200 – $500
Transmission fluid pressure sensor/switch replacement (often requires pan removal). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0845 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Connector inspection is easy; the sensor itself is often inside the pan on the valve body.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →