P0830

P0830: Clutch pedal switch A circuit

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The main clutch pedal switch (the one that lets the car start) has an electrical fault. The engine may not crank at all, or it might crank without the clutch pressed.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Look up TSBs for the year, make, and model matching this code.
  2. Locate switch A on the clutch pedal bracket and inspect it and its wiring for damage, rubbing, or burn spots. Tests: Failed clutch pedal switch A (most common)
  3. Check connectors and pins for corrosion and looseness at the switch, control module, starter, and starter solenoid; check the circuit fuse. Tests: Corroded or loose connector at the switch or control module
  4. Verify power on one side of the switch with the clutch released and on both sides with it pressed. Tests: Failed clutch pedal switch A (most common)
  5. Test continuity through the switch with power removed - there should be continuity with the clutch engaged and none with it released.
  6. Clear the code and confirm the engine cranks only with the clutch pressed.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$25 – $120
Labor$80 – $180

Clutch pedal position switch A replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0830 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Under-dash switch inspection and basic multimeter tests catch most of these.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →