P081D

P081D: Neutral input circuit

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car cannot reliably tell the computer it is in Neutral. Starting may be flaky, and the gear display may be wrong.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check the dash gear indicator in every shifter position and try starting in Neutral versus Park. Tests: Failed or misadjusted transmission range/neutral safety switch (most common)
  2. Look up TSBs for the year, make, and model matching this code.
  3. Inspect the range/neutral safety switch, shift cable, and linkage for looseness, wear, or misadjustment. Tests: Failed or misadjusted transmission range/neutral safety switch (most common)
  4. Test the Neutral input signal at the switch with the shifter in and out of Neutral. Tests: Failed or misadjusted transmission range/neutral safety switch (most common)
  5. Test the switch against factory specifications; adjust or replace it per procedure.
  6. Clear the code and confirm the scan-tool Neutral reading matches the shifter in every detent.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$50 – $250
Labor$100 – $300

Transmission range sensor / neutral safety switch replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P081D ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Same switch and same adjustment procedure as the Park input - one job covers both.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →