P0813

P0813: Reverse output circuit

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The computer knows you are in reverse, but the signal is not reaching your backup lights. Same dead-or-stuck-on backup light symptoms as P0812, different half of the circuit.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check reverse light behavior and the reverse input reading on the scan tool - if the input reads correctly, the fault is on the output side. Tests: Shorted or open wiring in the reverse output circuit
  2. Look up TSBs for the year, make, and model matching this code.
  3. Test voltage, ground, and signal at the reverse sensor/switch, then at the lamp assemblies. Tests: Failed reverse position sensor or neutral safety switch (most common)
  4. Trace the output circuit from the computer to the lights, checking for opens, shorts, and corroded connectors. Tests: Shorted or open wiring in the reverse output circuit
  5. Test the sensor/switch itself; replace it if it fails factory specs.
  6. Clear the code and verify the lights and scan-tool reverse output agree in every shifter position.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $200
Labor$100 – $250

Reverse position sensor replacement or output-circuit wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0813 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Work from the lights backward toward the computer - most faults are in the sensor, its wiring, or a connector.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →