P0812

P0812: Reverse input circuit

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your car cannot reliably tell the computer it is in reverse. The backup lights may be dead or stuck on, and the car might misbehave when backing up.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check what the reverse lights actually do - dead, stuck on, or normal narrows the fault fast. Tests: Failed reverse position sensor (most common on manuals)
  2. Look up TSBs for the year, make, and model matching this code.
  3. Locate the reverse position sensor (manual) or neutral safety switch (automatic) and inspect its wiring and connector. Tests: Failed reverse position sensor (most common on manuals)
  4. Test voltage, ground, and signal at the sensor with the shifter in and out of reverse. Tests: Failed reverse position sensor (most common on manuals)
  5. Test the sensor/switch itself against factory specifications; replace it if it fails.
  6. Clear the code and confirm the reverse input reads correctly on the scan tool in every shifter position.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $200
Labor$100 – $250

Reverse position sensor or neutral safety switch replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0812 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — The sensor or switch is on the transmission and usually one connector plus a couple of bolts.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →