P0809

P0809: Clutch position sensor A circuit intermittent

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your clutch pedal switch works most of the time but cuts out randomly - expect the occasional no-start or the engine dying when you press the clutch, then everything works again.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Look up TSBs for the year, make, and model matching this code.
  2. Graph the clutch position sensor signal on the scan tool while wiggling the harness, tapping the sensor, and working the pedal - watch for dropouts. Tests: Failing clutch position sensor with an internal intermittent break
  3. Inspect every connector in the circuit for corrosion, spread pins, and weak terminal tension; clean and re-tension as needed. Tests: Loose, corroded, or spread connector pin at the sensor or control module (most common)
  4. Check the control-module ground straps for looseness or corrosion. Tests: Loose control-module ground strap
  5. Flex-test the wiring where it passes through the firewall and around the pedal bracket, feeling for internal wire breaks.
  6. Only replace the sensor if the wiggle test isolates the dropout to the sensor itself.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$25 – $120
Labor$100 – $250

Connector repair or clutch position sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0809 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Intermittents are found by wiggle-testing the harness while watching live data - patience, not parts, fixes these.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →