P0801

P0801: Reverse inhibit control circuit

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

A safety solenoid keeps you from slamming into reverse while rolling forward, and its wiring has a fault. Worst case the shifter could drop into reverse at speed, or you might not get reverse at all.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check and replace any blown fuses in the transmission control circuits first - a shorted solenoid is a common cause. Tests: Open or shorted wiring or connector in the reverse inhibit control circuit
  2. Scan all codes and freeze-frame data, clear, and road-test to confirm the code returns.
  3. Inspect the reverse inhibit solenoid and its wiring for chafing, corrosion, or damage, especially where the harness flexes near the transmission. Tests: Failed reverse inhibit solenoid (most common)
  4. Test power and ground at the solenoid, then test the solenoid itself against factory specifications. Tests: Failed reverse inhibit solenoid (most common)
  5. Check shifter linkage and bushings for wear that could fight the inhibit mechanism.
  6. Use voltage-drop testing on the control and signal circuits back to the control module before suspecting the module.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$60 – $250
Labor$100 – $300

Reverse inhibit solenoid replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0801 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — The solenoid is usually accessible on the transmission, but testing its circuit properly takes a multimeter and the factory wiring chart.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →