Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car may limp - find the short before driving far.
Your car's computer powers a group of sensors on supply feed A, and that power the supply voltage stuck unusually low. One shorted part can kill the feed for all of them - unplug things one at a time to find the culprit.
Key facts
P06B1 means sensor Power Supply A Circuit Low. Your car's computer powers a group of sensors on supply feed A, and that power the supply voltage stuck unusually low. One shorted part can kill the feed for all of them - unplug things one at a time to find the culprit. WrenchFair's published fair-price range for this repair is $30–$300 parts and $100–$300 labor at independent shops.
WrenchFair rates P06B1 a 3-of-5 DIY difficulty (“Unplug-one-at-a-time diagnosis.”) with a “Diagnose soon” driveability rating: The car may limp - find the short before driving far. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
multiple codes at once
limp mode
Likely causes
shorted sensor or actuator on the supply feed
wiring short
corroded connector
internal module fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Unplug components on the feed one at a time until voltage returns.
Check the wiring for shorts. Tests: wiring short
Suspect the PCM only after every wire and component test passes - module failure is rare. Tests: internal module fault (rare)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $300
Labor$100 – $300
Shorted component replacement or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P06B1 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →