Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable; fix if the speedometer or cruise is affected.
Your car's computer sends a speed signal out to the dashboard and other systems, and output A has a fault. If the speedometer works, the wiring to the cluster is suspect; check the wiring before the computer.
Key facts
P0608 means control Module VSS Output A. Your car's computer sends a speed signal out to the dashboard and other systems, and output A has a fault. If the speedometer works, the wiring to the cluster is suspect; check the wiring before the computer. WrenchFair's published fair-price range for this repair is $50–$1200 parts and $100–$400 labor at independent shops.
WrenchFair rates P0608 a 3-of-5 DIY difficulty (“Wiring tracing between the module and the cluster.”) with a “Diagnose soon” driveability rating: Drivable; fix if the speedometer or cruise is affected. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
speedometer acting up
cruise control inoperative
check engine light on
Likely causes
open or shorted wiring in the VSS output circuit
corroded connector
faulty instrument cluster loading the circuit
internal module fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Visually inspect the wiring, connectors, and hoses around the component for damage, corrosion, chafing, loose pins, or disconnection. Tests: corroded connector
Check whether the speedometer works - that narrows down which side of the circuit is bad. Tests: open or shorted wiring in the VSS output circuit
Test the output circuit for opens or shorts. Tests: open or shorted wiring in the VSS output circuit
Suspect the PCM only after every wire and component test passes - module failure is rare.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $1200
Labor$100 – $400
Wiring repair or control module replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0608 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Wiring tracing between the module and the cluster.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →