Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFix soon - without the warning lamp you might miss an overheat.
Your engine-overheat warning light has a circuit fault - it may not warn you if the engine overheats. Make sure the temperature gauge works and fix the lamp circuit; driving blind to overheating is risky.
Key facts
P0655 means engine Hot Lamp Output Control Circuit. Your engine-overheat warning light has a circuit fault - it may not warn you if the engine overheats. Make sure the temperature gauge works and fix the lamp circuit; driving blind to overheating is risky. WrenchFair's published fair-price range for this repair is $10–$80 parts and $50–$150 labor at independent shops.
WrenchFair rates P0655 a 2-of-5 DIY difficulty (“Lamp and wiring check; verify the gauge as backup.”) with a “Diagnose soon” driveability rating: Fix soon - without the warning lamp you might miss an overheat. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
overheat warning light not working
check engine light on
Likely causes
failed lamp
open or shorted wiring
wiring fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Verify the temperature gauge reads correctly.
Check the lamp and wiring.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$10 – $80
Labor$50 – $150
Lamp or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0655 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Lamp and wiring check; verify the gauge as backup.
Torque specs: Thermostat housing bolts: typically 8–12 Nm. Aluminum threads strip easily — verify spec and use a torque wrench.
Pro tip: Bleed the cooling system per the factory procedure after refilling, or trapped air will overheat the engine and fake a “still broken” reading.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →