P063E: Auto Configuration Throttle Input Not Present (Bank 1)
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe module is not fully configured - complete the setup soon.
Your car's computer was trying to set itself up and could not find the throttle signal. This usually shows up right after a computer replacement or software update. Check that sensor and wiring, then finish the setup with a proper scan tool.
Key facts
P063E means auto Configuration Throttle Input Not Present (Bank 1). Your car's computer was trying to set itself up and could not find the throttle signal. This usually shows up right after a computer replacement or software update. Check that sensor and wiring, then finish the setup with a proper scan tool. WrenchFair's published fair-price range for this repair is $50–$300 parts and $100–$300 labor at independent shops.
WrenchFair rates P063E a 3-of-5 DIY difficulty (“Needs a scan tool that can run configuration routines.”) with a “Diagnose soon” driveability rating: The module is not fully configured - complete the setup soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
module functions limited
may follow a recent repair
Likely causes
faulty throttle sensor
wiring fault in the throttle circuit
incomplete module configuration after replacement
wrong module for the vehicle
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Verify the throttle sensor reads correctly. Tests: faulty throttle sensor
Check its wiring.
Run the module configuration routine. Tests: incomplete module configuration after replacement
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $300
Labor$100 – $300
Sensor repair or module configuration. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P063E ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Needs a scan tool that can run configuration routines.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →