Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable but shifting may be wrong - get the software matched soon.
Your engine computer and transmission computer are running software versions that do not match - usually because one was replaced or updated without the other. A dealer reflash with matched software is the fix.
Key facts
P0614 means eCM/TCM Incompatible. Your engine computer and transmission computer are running software versions that do not match - usually because one was replaced or updated without the other. A dealer reflash with matched software is the fix. WrenchFair's published fair-price range for this repair is $0–$200 parts and $100–$250 labor at independent shops.
WrenchFair rates P0614 a 4-of-5 DIY difficulty (“Dealer-level reflash with compatible calibrations.”) with a “Diagnose soon” driveability rating: Drivable but shifting may be wrong - get the software matched soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
harsh or wrong shifting
check engine light on
limp mode possible
Likely causes
one module replaced without matching software
one module reflashed to a different calibration
wrong module installed for the vehicle
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Verify both modules' part numbers and software versions against the factory catalog. Tests: one module replaced without matching software
Have a dealer reflash both modules with compatible software. Tests: one module replaced without matching software
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $200
Labor$100 – $250
Module reflash with compatible software. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0614 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Dealer-level reflash with compatible calibrations.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →