Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonTransmission computer fault. Expect limp mode - drive gently to a shop.
Your transmission's computer failed its internal self-check. The transmission may go into limp mode - but check its power supply first, since weak power fakes this fault.
VW/Audi note (VCDS): If the TCM drops off the network intermittently, suspect power or water before the module itself.
Model notes: TCMs mounted under the car or in the transmission are exposed to water and heat - location-related failures are common and worth preventing with proper sealing on replacement.
Key facts
P0613 means tCM processor fault. Your transmission's computer failed its internal self-check. The transmission may go into limp mode - but check its power supply first, since weak power fakes this fault. WrenchFair's published fair-price range for this repair is $300–$900 parts and $200–$500 labor at independent shops.
WrenchFair rates P0613 a 4-of-5 DIY difficulty (“Power and ground first; TCM replacement often needs programming.”) with a “Diagnose soon” driveability rating: Transmission computer fault. Expect limp mode - drive gently to a shop. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
limp mode
harsh shifts
check engine light
TCM communication errors
speedometer reads wrong or stops working
Likely causes
Failing TCM (most common)
TCM power or ground problem
Water intrusion in the TCM
Voltage spike damage
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Verify TCM power and ground under load Tests: TCM power or ground problem
Check for water intrusion - TCMs are often mounted low in the vehicle Tests: Water intrusion in the TCM
Scan for accompanying voltage codes Tests: Voltage spike damage
Replace and program the TCM only after power is proven good
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$300 – $900
Labor$200 – $500
Module replacement plus programming. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0613 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Power and ground first; TCM replacement often needs programming.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →