P0500

P0500: Vehicle speed sensor A circuit malfunction

For your specific vehicle: P0500 on a 2017–2024 Mazda CX-5 · 2013–2019 Nissan Sentra · 2010–2024 Toyota 4Runner

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The sensor that tells your car how fast it's going has failed. Expect a dead speedometer, no cruise control, and harsh transmission shifting all at the same time.

VW/Audi note (VCDS): Compare the ECM vehicle-speed PID against a GPS speed app; disagreement or zero reading confirms the sensor fault.
Model notes: A dead speedometer plus shifting complaints is the classic combination - both come from the same missing speed signal. On many vehicles the transmission uses its own internal speed sensors, so shifting may be unaffected.

Key facts

Symptoms

Likely causes

Owner notes linked to P0500: 3 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 4 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Watch the vehicle speed PID on the scan tool while driving - no signal confirms the fault Tests: Failed vehicle speed sensor (most common)
  2. Inspect the sensor, its wiring, and the tone ring for damage Tests: Damaged tone ring or reluctor the sensor reads
  3. Check for related ABS codes that can narrow down which wheel or sensor is involved
  4. Replace the sensor if the circuit is intact but produces no signal

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$30 – $120
Labor$80 – $200

Sensor replacement is the typical fix. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0500 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — Usually one bolt and a connector; the sensor is often on the transmission housing.

Watch this repair on YouTube

Parts & tools

Sensor replacement toolkit — what the job actually takes

Torque specs: Sensor mounting bolts: typically 8–12 Nm — verify spec. Never overtighten sensors with plastic bodies.

Pro tip: Check wiring and connectors first — chafed wires and corroded pins cause more sensor codes than dead sensors do.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →