Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable but unpleasant - stalling in traffic is a safety issue, so fix it soon.
Your EGR valve is stuck open, so exhaust gas keeps pouring into the engine even at idle when it should be shut. That is why the idle is rough or the engine stalls - carbon gunk is the usual culprit holding it open.
Key facts
P042E means exhaust Gas Recirculation A Stuck Open. Your EGR valve is stuck open, so exhaust gas keeps pouring into the engine even at idle when it should be shut. That is why the idle is rough or the engine stalls - carbon gunk is the usual culprit holding it open. WrenchFair's published fair-price range for this repair is $60–$320 parts and $100–$250 labor at independent shops.
WrenchFair rates P042E a 2-of-5 DIY difficulty (“Valve removal and cleaning or replacement; accessible on most engines.”) with a “Diagnose soon” driveability rating: Drivable but unpleasant - stalling in traffic is a safety issue, so fix it soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
rough idle
engine stalling at idle
hesitation on acceleration
Likely causes
heavy carbon buildup holding the EGR pintle open
failed EGR valve
wiring fault keeping the valve commanded open
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Visually inspect the wiring, connectors, and hoses around the component for damage, corrosion, chafing, loose pins, or disconnection.
Remove the EGR valve and check whether the pintle is stuck open with carbon; clean it and test whether it seats. Tests: heavy carbon buildup holding the EGR pintle open
If cleaning does not free it, replace the valve with a new gasket.
Clear the code and confirm the position feedback moves correctly with a scan tool.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $320
Labor$100 – $250
EGR valve cleaning or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P042E ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Valve removal and cleaning or replacement; accessible on most engines.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →