Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeNot urgent - the car runs fine and only cold-start emissions are affected.
The relay that switches the air pump on and off has an electrical problem in its control circuit. The pump itself may be perfectly fine - start with the relay, its fuse, and the wiring, because this code is about the switch, not the pump.
Key facts
P0418 means secondary Air Injection System Relay A Circuit. The relay that switches the air pump on and off has an electrical problem in its control circuit. The pump itself may be perfectly fine - start with the relay, its fuse, and the wiring, because this code is about the switch, not the pump. WrenchFair's published fair-price range for this repair is $15–$60 parts and $50–$100 labor at independent shops.
WrenchFair rates P0418 a 1-of-5 DIY difficulty (“Relay swap and fuse check - one of the easiest codes to diagnose.”) with a “Drive safe” driveability rating: Not urgent - the car runs fine and only cold-start emissions are affected. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
no noticeable driving symptoms
failed emissions test
Likely causes
failed air pump relay
blown fuse in the air pump circuit
open or shorted wiring in the relay control circuit
corroded relay socket or connector
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Check the related fuses and relays before condemning any part - an open fuse is a cheap fix. Tests: open or shorted wiring in the relay control circuit
Swap the air pump relay with an identical relay from a non-critical circuit and see if the code clears. Tests: blown fuse in the air pump circuit
Inspect the relay socket for corrosion or melted plastic. Tests: corroded relay socket or connector
Visually inspect the wiring, connectors, and hoses around the component for damage, corrosion, chafing, loose pins, or disconnection.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $60
Labor$50 – $100
Secondary air pump relay replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0418 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
1 of 5 — Relay swap and fuse check - one of the easiest codes to diagnose.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →