Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonIf the check engine light is flashing, stop driving - raw fuel is cooking the catalytic converter.
There's a fault in the ignition coil circuit but the computer can't tell which coil - a shared wiring or driver problem.
Key facts
P0350 means ignition coil primary/secondary circuit fault. There's a fault in the ignition coil circuit but the computer can't tell which coil - a shared wiring or driver problem. WrenchFair's published fair-price range for this repair is $40–$150 parts and $100–$300 labor at independent shops.
WrenchFair rates P0350 a 3-of-5 DIY difficulty (“Check shared power, ground, and wiring before suspecting the ECM.”) with a “Diagnose soon” driveability rating: If the check engine light is flashing, stop driving - raw fuel is cooking the catalytic converter. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
misfires
rough running
Likely causes
Wiring fault on the shared coil circuit (most common)
Failed coil driver in the ECM
Multiple failing ignition coils
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check coil power and ground at the coil connector
Use mode $06 to find which cylinders misfire
Inspect the shared wiring harness Tests: Wiring fault on the shared coil circuit (most common)
Test individual coils
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$100 – $300
Ignition coil circuit diagnosis and coil replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0350 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Check shared power, ground, and wiring before suspecting the ECM.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →