Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonAn erratic RPM signal can stall the engine - don't ignore it.
Your engine's RPM signal is unreliable - the ignition system is feeding the computer bad data.
Key facts
P0321 means ignition/distributor engine speed input range/performance. Your engine's RPM signal is unreliable - the ignition system is feeding the computer bad data. WrenchFair's published fair-price range for this repair is $40–$150 parts and $100–$250 labor at independent shops.
WrenchFair rates P0321 a 3-of-5 DIY difficulty (“Watch the RPM signal on a scan tool while the engine runs.”) with a “Diagnose soon” driveability rating: An erratic RPM signal can stall the engine - don't ignore it. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
erratic tachometer
misfires or stalling
Likely causes
Failing crank position sensor (most common)
Failing distributor pickup
Wiring noise or damaged shielding
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Watch the RPM signal for dropouts on a scan tool
Inspect the crank sensor and its wiring Tests: Failing crank position sensor (most common)
Check the distributor pickup if equipped Tests: Failing distributor pickup
Replace the sensor if the signal is erratic
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$100 – $250
Crank position sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0321 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Watch the RPM signal on a scan tool while the engine runs.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →