P02EC: Diesel intake air flow 'A' control - high air flow detected
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFix within a reasonable time.
Your diesel's intake valve isn't restricting airflow as commanded - it's stuck or there's an air leak.
Model notes: Primarily a diesel code.
Key facts
P02EC means diesel intake air flow 'A' control - high air flow detected. Your diesel's intake valve isn't restricting airflow as commanded - it's stuck or there's an air leak. WrenchFair's published fair-price range for this repair is $100–$400 parts and $100–$300 labor at independent shops.
WrenchFair rates P02EC a 3-of-5 DIY difficulty (“Command the valve closed and check for leaks.”) with a “Diagnose soon” driveability rating: Fix within a reasonable time. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
possible EGR codes
Likely causes
Valve stuck open (most common)
Intake air leak downstream of the valve
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Command the valve closed on a scan tool
Smoke-test the intake for leaks Tests: Intake air leak downstream of the valve
Clean or replace the valve if it won't close
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $400
Labor$100 – $300
Diesel intake air flow control valve replacement or intake leak repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P02EC ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Command the valve closed and check for leaks.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →