P02E5: Diesel intake air flow 'A' control stuck closed
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonSevere power loss - fix before driving far.
Your diesel's intake air control valve is stuck closed - the engine can't breathe. Expect severe power loss.
Model notes: Primarily a diesel code.
Key facts
P02E5 means diesel intake air flow 'A' control stuck closed. Your diesel's intake air control valve is stuck closed - the engine can't breathe. Expect severe power loss. WrenchFair's published fair-price range for this repair is $100–$400 parts and $100–$300 labor at independent shops.
WrenchFair rates P02E5 a 3-of-5 DIY difficulty (“A stuck-closed valve is obvious - the engine barely runs.”) with a “Diagnose soon” driveability rating: Severe power loss - fix before driving far. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
severe power loss
heavy smoke
Likely causes
Carbon jamming the valve closed (most common)
Failed valve motor
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Remove the valve and inspect for carbon jamming Tests: Carbon jamming the valve closed (most common)
Clean the valve and test movement
Replace the valve if it won't open
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $400
Labor$100 – $300
Diesel intake air flow control valve cleaning or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P02E5 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — A stuck-closed valve is obvious - the engine barely runs.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →