P02E0: Diesel intake air flow 'A' control circuit open
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFix within a reasonable time - EGR and emissions suffer.
Your diesel's intake air control valve has an open circuit - expect rough shutdowns and EGR problems.
Model notes: Primarily a diesel code.
Key facts
P02E0 means diesel intake air flow 'A' control circuit open. Your diesel's intake air control valve has an open circuit - expect rough shutdowns and EGR problems. WrenchFair's published fair-price range for this repair is $100–$400 parts and $100–$300 labor at independent shops.
WrenchFair rates P02E0 a 3-of-5 DIY difficulty (“The valve is on the intake and usually easy to reach.”) with a “Diagnose soon” driveability rating: Fix within a reasonable time - EGR and emissions suffer. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
rough engine shutdown
possible EGR codes
Likely causes
Failed intake air flow control valve (most common)
Blown fuse
Broken wiring or corroded connector
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the valve fuse
Verify power and ground at the valve
Command the valve on a scan tool
Replace the valve if it doesn't respond
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $400
Labor$100 – $300
Diesel intake air flow control valve replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P02E0 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The valve is on the intake and usually easy to reach.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →