P0173

P0173: Fuel trim malfunction, bank 2

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Your engine computer has maxed out its fuel adjustment on bank 2. Look for a bank-2-specific problem like that side's injectors, oxygen sensor, or an exhaust leak.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Compare bank 1 and bank 2 fuel trims - isolated bank-2 trims mean a bank-2-specific fault Tests: Low fuel pressure (affects both banks)
  2. Smoke-test the bank-2 intake side Tests: Bank-2 vacuum or intake leak
  3. Check for exhaust leaks on bank 2 ahead of the O2 sensor Tests: Bank-2 exhaust leak ahead of the O2 sensor
  4. Verify the bank-2 upstream O2 sensor is switching properly Tests: Failing bank-2 upstream O2 sensor
  5. Check shared causes (MAF, fuel pressure) if both banks are off

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$20 – $300
Labor$100 – $400

Bank-2 vacuum leak repair or O2 sensor service - depends on root cause. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0173 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Compare bank 1 vs bank 2 trims - if only bank 2 is off, the cause is bank-2-specific.

Watch this repair on YouTube

Parts & tools

Fuel system toolkit — what the job actually takes

Torque specs: Fuel rail bolts: typically 8–12 Nm — verify spec.

Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

🔌 Read your spark plugs This code names the unhappy system; your plugs show what the combustion actually looks like. Pull one and match it to the visual chart — how to read your spark plugs →
Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →