Your oxygen sensor's built-in heater died. The car drives fine once warmed up, but cold-start fuel control suffers. Straightforward sensor swap.
WrenchFair rates every code on a three-level driveability scale — Drive safe, Diagnose soon, Stop driving — based on what the fault can do if you keep driving. For P0135, the rating comes down to this: Safe to drive. Cold-start emissions and fuel economy are affected.
These overrule any rating. Pull over safely and stop the engine if:
This is the kind of fault people drive on for weeks while they arrange the fix. Still get it diagnosed rather than ignoring it — the underlying cause can get worse, and it can fail an emissions inspection.
The warning light can turn off by itself after clean drive cycles, but the code stays stored in the computer's memory and the fault is still there. Clearing it without fixing the cause just buys time — it will come back when the computer re-runs the self-test. Exception: a loose gas cap — tighten it and drive a few days.
Yes. P0135 doesn't make your car unsafe to drive on its own. Safe to drive. Cold-start emissions and fuel economy are affected. Fix it when convenient rather than putting it off indefinitely — even a minor fault can turn into a bigger bill if the underlying cause gets worse.
Low. WrenchFair rates this one “Drive safe” — the least serious of its three driveability ratings. It's a fix-on-your-schedule fault, not a same-day emergency. Safe to drive. Cold-start emissions and fuel economy are affected.
The warning light can turn off by itself after clean drive cycles, but the code stays stored in the computer's memory and the fault is still there. Clearing it without fixing the cause just buys time — it will come back when the computer re-runs the self-test. Exception: a loose gas cap — tighten it and drive a few days.
Read the full P0135 guide → Diagnose your code
Got a shop quote? Grade it →