P011D: Engine coolant temperature sensor 2 circuit high
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFan control for that circuit is compromised - watch the temperature gauge.
Your secondary coolant temperature sensor circuit is open, so the computer thinks that part of the engine is freezing.
Key facts
P011D means engine coolant temperature sensor 2 circuit high. Your secondary coolant temperature sensor circuit is open, so the computer thinks that part of the engine is freezing. WrenchFair's published fair-price range for this repair is $15–$80 parts and $80–$200 labor at independent shops.
WrenchFair rates P011D a 2-of-5 DIY difficulty (“Check for an unplugged connector first.”) with a “Diagnose soon” driveability rating: Fan control for that circuit is compromised - watch the temperature gauge. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
cooling fans not engaging properly
Likely causes
Failed (open) ECT sensor 2 (most common)
Broken wire in the sensor circuit
Unplugged or corroded connector
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check that the sensor is plugged in
Inspect the wiring for breaks
Test for continuity through the circuit Tests: Broken wire in the sensor circuit
Measure the sensor's resistance - infinite means failed open Tests: Failed (open) ECT sensor 2 (most common)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $80
Labor$80 – $200
Engine coolant temperature sensor 2 replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P011D ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
Torque specs: Thermostat housing bolts: typically 8–12 Nm. Aluminum threads strip easily — verify spec and use a torque wrench.
Pro tip: Bleed the cooling system per the factory procedure after refilling, or trapped air will overheat the engine and fake a “still broken” reading.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →