Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFueling is off - clean or replace the faulty sensor soon.
Your two airflow sensors disagree with each other - one is dirty or skewed, or one intake path has a leak.
Key facts
P010F means mAF sensor 'A'/'B' correlation. Your two airflow sensors disagree with each other - one is dirty or skewed, or one intake path has a leak. WrenchFair's published fair-price range for this repair is $60–$250 parts and $80–$200 labor at independent shops.
WrenchFair rates P010F a 2-of-5 DIY difficulty (“Clean both sensors first - it's cheap and fixes most of these.”) with a “Diagnose soon” driveability rating: Fueling is off - clean or replace the faulty sensor soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
rough idle
hesitation
poor fuel economy
Likely causes
Contaminated MAF sensor on one path (most common)
Intake leak or restriction on one path
Skewed/failing MAF sensor on one side
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Clean both MAF sensors with dedicated cleaner
Compare 'A' and 'B' readings at idle and under load - the odd one out is the culprit
Smoke-test the intake path of the low-reading side for leaks Tests: Intake leak or restriction on one path
Check the high-reading side for restrictions Tests: Intake leak or restriction on one path
Replace the sensor that reads wrong when clean
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $250
Labor$80 – $200
MAF sensor cleaning or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P010F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Clean both sensors first - it's cheap and fixes most of these.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →